Everest EGSWH4 59″ Two Section Solid & Glass Door Reach-In Refrigerator, 55.0 cu. ft.

Why use Everets Reach-In Series?

Everest’s Upright Top Mounted Reach-In Series offers an outstandingcombination of refrigerator, freezer, and dual temperature options as wellas full or half door drawer variations for multiple applications. The lineis geared for sustainability and energy efficiency with features designedto reduce compressor run time and the reliance on electricity. Equippedwith the Blizzard R290 system, a fully self-contained and detachablecondensing unit which uses environmentally friendly R404A refrigerant withzero (0) Ozone Depletion Potential (ODP) and?EPA-compliant R290refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3)Global Warming Potential (GWP). Blizzard R290 is easily replaceable andrequires no on-site brazing.

The Everest EGSWH4 Refrigeration System

• Top mounted, self-contained and fully detachable condensing unit usesenvironmentally friendly R404A refrigerant with zero (0) Ozone DepletionPotential (ODP) and EPA compliant R290 refrigerant with zero (0) OzoneDepletion Potential (ODP) and three (3) Global Warming Potential (GWP).R290 condensing units are replaceable and require no on-site brazing
• PSC evaporator fan motors for R404A models. Electronically commutated(ECM) fan motors for R290 models
• Airflow guard ensures optimal circulation of cold air. R290 modelsinclude full-length air duct system.
• Time-initiated and temperature-terminated auto defrost heater for R404Aand R290 freezers. Air defrost for R290 refrigerators
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Self-maintaining, energy-efficient condensate drain pan requires noexternal drains or electric heaters.
• High performance condenser fan motors ensure efficient compressorventilation. R290 models use auto-reverse condenser fan motors whichalso support condenser coil cleaning. Refer to owner’s manual for fullmaintenance instructions.
• Pressure relief devices allow smooth access to cabinet interior whenreopening doors.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.

Cabinet Construction And Doors

• Heavy duty stainless steel interior / exterior with rounded corners fora hazard-free workspace
• Galvanized steel top, bottom and rear.
• 2.5″ thick high density polyurethane insulation.
• Four 5″ swivel casters with locks on front set and two front legstabilizers
• Low emissivity double glass panes and matte finish aluminum door framesfor glass doors.
• Heavy duty stainless steel interior / exterior with 2.5″ thick highdensity polyurethane insulation for solid doors.
• Frame heaters prevent exterior moisture build up.
• Self-closing with adjustable torsion system for a positive seal.
• Snap-in magnetic door gaskets make cleaning and replacement an easyprocess.
• Heavy duty, die-cast door handles for glass doors. High strength,recessed door handles for solid doors.
• Pre-installed door locks keep your items safe from theft.
• Shielded LED bar lighting with on/off switch provides bright, high colorillumination at lower heat output

Shelving And Temperature Control

• Four epoxy coated, steel wire shelves per section.
• Height adjustable stainless steel clips.
• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, 35°F for refrigerators and -4°F forfreezers. Temperature setting range from 33°F to 54°F for refrigeratorsand -10°F to 54°F for freezers.
• R290 models include audible overheat protection alarm for compressor andcondenser coil